|
Hovair Systems air lifting (lift) jacks are an ideal
solution if you have loads that need to be at a certain level in order to
operate correctly. Such loads could be scaffolding or certain machinery
that needs constant level checking.
This
load leveling (jacks) equipment would be
suitable in the
case of needing to lift machinery, or other such loads, in order to drop
them onto leveling pads or their own sets of wheels, or simply to add
leveling devices or adjust them to suit the operation.
From the pictures (right) you will notice that the lift
jacks are permanently mounted onto an air bearing. This gives you the
flexibility of being able to move your load directly from the lift jack
units. In the case of scaffold, for instance, these jacks would be ideal
because they can actually level the structure as well as move it to
another area in just one operation. As with all our air bearing products,
all you need is a little shop air plugged into a valve and off you go. It
really is that simple.
In the picture to the right, you will see a
cranking handle which allows you to manually lift or lower your load. Just below
the crank handle is a metal attachment plate which is used to permanently
attach your load to the lift jack. Also shown is the air valve & air
flow control
which indicates just how easy it is to operate these great devices.
Please note: all jacks are supplied with top-mounted
crank handles as standard. A side-mounted crank handle is available on
request. |
